The SkyRC Toro TS120 Competition ESC includes a brand-new anodized aluminum case and a low internal resistance of less than 0.0003 ohm. Smooth and precise throttle response integrated with braking performance suitable for 1/10th scale competitors. With 10 user defined power profiles available and Advance Timing System (ATS) for "Increase" and "Turbo" profiles both supply unique power curves fit for running in non-spec stock or customized classes. Blinky mode (zero timing) profile is available for organized spec class racing. New aluminum housing enhances cooling efficiency while supplying a works appearance. The TS120 includes an onboard switch design. No more external wired switches indicates racers not have to stress over switch positioning and finding space on today's high performance racing chassis'. Readily available program box is available for adjusting the ESC without the requirement for a computer or laptop computer at the track permitting racers to change ESC profiles, change ESC settings, test PPM signal in between transmitter and receiver, confirm servo performance, motor KV/ RPM performance and LiPo battery display functions on the LCD screen through the on-board RX plug, motor sensor, LiPo balancer, and USB ports (program box offered separately). Can also be configured via SkyLink and Wifi Module. • Size: 20x31x38.5 mm • Weight:45 g (without wires) • Constant/Burst Current: 120A/760A • Motor Compatible: Brushless sensored/sensorless • Automobile Compatible: 1/10 and 1/12 cars and truck or buggy, 1/10 and 1/8 crawler • Motor Limits: 5-6S Nimh or TWO LiPo: 3.5 T or higher, 8-9S NiMh or THREE LiPo, 5.5 T or higher • Cell Count: 4-9S NiMh or 2-3S LiPo • BEC Output: 6V@3A, linear • Fan: 5V@0.2A, Max 12V
Brushless sensored/sensorless operation with 10 mofifiable programs. Blinky mode for stock racing.
Can be programmed via SkyLink PC Cable, ProgBox programming box or through WiFi Module (iOS & Android device capable)
New anodized aluminum housing, 120A/760A Constant/Burst rating and 2-3S LiPo compatible with built-in 6V/3A linear BEC
Firmware is updatable through SkyLink/PC or Wifi Module
For 1/10 and 1/12 buggy and truck, and 1/10 and 1/8 crawler