This kit will adjust your Twin Hammers to be able to accept larger batteries and offer you the option to lift the rear end. The kit has the aluminum battery tray, Velcro battery strap and hardware. Setup Directions: 1) Eliminate stock battery tray and extra tire. (Save the 2 screws at the rear of battery tray for later) 2) Eliminate the roofing system. 3) Disconnect rear shocks from the 2 shock towers. 4) Eliminate the 2 rear shock towers. (Save the 6 screws that were holding the shock towers for later) 5) Install the aluminum bracket with notch towards the front of the vehicle. Make use of the 4 screws that you eliminated from the bottom of the shock tower. (pic 4,5,6) 6) Eliminate the number plates and 2 cross members under the roofing system. 7) Install kit together as displayed in picture 3 with hardware supplied. 8) Install put together battery tray into the notch. Make use of the 2 screws from task 1 with the 2 nuts supplied to secure the rear of the battery tray to the cross member. 9) Install the 2 shocks to the battery tray. 10) Install the 2 cross members that were under the roofing system. (Make use of the 2 remaining screws from task 4 to secure the cross member to the battery tray) 11) Install the roofing system and extra tire. 12) Install Velcro battery strap.
This kit will adapt your Twin Hammers to be able to accept larger batteries and give you the option to lift the rear end.
The kit comes with the aluminum battery tray, Velcro battery strap and hardware.